The Product

The GERMAN TOOLS products are high-quality solutions for ergonomic workplaces in industry and commerce.

The consistent quality of the products is guaranteed by the optimized production processes according to the quality management system ISO 9001.

MADE IN GERMANY

Torque arms image

Torque arms

Our torque arms are primarily used as handling aids for torque and angle controlled tools as well as for reaction intensive operations such as Drilling, countersinking and tapping. They allow the user an ergonomic workflow, as the torque and weight of the tool are intercepted and the torque is transmitted lossless on the screw. This enables a clean positioning, which significantly contributes to quality assurance.

The main components were designed in an industry-ready, distinctive design. The torque range of our torque arms ranges from 10 Nm to 1000 Nm and is covered by seven models.

TA10

For the maximum torque of 10 Nm. With balancer.

TA40, 80 and 150

For the maximum torque of 40/80/150 Nm. With cable balancer.

TA300, 500 and 1000

For the maximum torque of 300/500/1000 Nm. With cable balancer.

Starting Handles image one
Starting Handles image two

Starting Handles

Starting handles are used by the user for easy control of the electric or pneumatic screwdrivers. German Tools offers these in two versions.

Universal launching handles

Our universal starter handles, made of robust PPO plastic, are available in different versions. Protection class IP54IEC 529 DIN40050.

Electrical

3000UHT

Universal handle single

Universalhandgriff (1x NO contact)

3000UHD2

Universal handle dual

Universalhandgriff (2x NO contact)

3000UHO

Universal Handle -Open UHO

Universalhandgriff (1x NO and NC - contact)

3000UDH

Universal dead handle

Universalhandgriff (w/o function)

Cabel 4x0,5 mm² (600 mm long) with M12 plug

Pneumatic

3000UHP

Universal handle pneumatic

Universalhandgriff (1x pneum. signal)

length of tube ca. 1000mm

„Heavy Duty“ handles

Our "Heavy Duty" starting handles are a bit more "robust"! The handle base is made of aluminum and the handle itself made of black POM (polyoxymethylene).

Electrical

3000MHT

Heavy Duty MHT

Universalhandgriff (1x NO contact)

3000MHD

Heavy Duty MHD

Universalhandgriff (2x NO contact)

3000MDH

Heavy Duty Dead

Universalhandgriff (w/o function)

Cabel 4x0,5 mm² (600 mm long) with M12 plug

Pneumatic

3000MHP

Heavy Duty Pneumatic

Universalhandgriff (1 pneum. signal)

length of tube ca. 1000mm

Accessories image

Accessories

The accessories then round it off.

Mounting accessories for handles

3000HA

Horizontal adapter

3000VA

Vertical adapter

in stainless steel

Serves as an intermediate piece to mounting plate and handle. Completely drilled with center hole as passage for cable or hose. The scope of delivery includes 4 fixing screws and a rubber washer.

Mounting accessories for the screwdrivers

Mounting plates are used to attach a screwdriver / tool to the traverse arm of the torque arm from size TA80. The receiving plate has a groove which forms a positive connection to the traverse of the torque arm.

These plates are available for many screwdrivers from different manufacturers.

Please contact us!

Extension adapter is used to increase the projection without changing the stroke.

Connection and extension cable

By default we have different lengths in our portfolio. For other lengths please contact us.

3000CC3

Connection cable 3m

Anschlusskabel, 3m

3000CC5

Connection cable 5m

Anschlusskabel, 5m

3000CC10

Connection cable 10m

Anschlusskabel, 10m

3000EC10

Extention cable 10m

Verlängerungskabel, 10m

3000EC15

Extention cable 15m

Verlängerungskabel, 15m

3000CON1

Connector 1

Y-Adapter (Aktor-Sensor 2-fach Verteiler

Blacklancer image

"Blacklancer"

Our black balancers and retractors enable safe, fluid work processes and reliably prevent premature fatigue. Awarded the GS mark for tested safety, our BLACKLANCER program convinces with its long service life and simple design, maintenance and high operational safety. The BLACKLANCER products are unrivaled in international comparison and have been awarded top marks.

In addition, the products are long-term tested and meet the DIN 15112 standard.
Return and balancer with or without lock and with and without pull-out -
At German Tools, you will receive the entire Blacklancer range.

By using devices with locking function it is possible to position the suspended load at the desired height. Without the locking functions, the suspended load is automatically returned to its original position after use.

The Blacklancer balancers and balancers are suitable for various applications. Exemplary tools and devices are: cutting machines, saws, pliers, multiple screwdrivers, slaughter machines, welding tongs, measuring robots, packaging equipment, rivet bars, assembly units.

Please contact us!

Your individual offer

Fill in the form and we will contact you within 24 hours
Ongeldige invoer
Ongeldige invoer
Ongeldige invoer
Ongeldige invoer
Ongeldige invoer
Ongeldige invoer
Ongeldige invoer
Invalid Input

Imprint

Editor:
German Tools GmbH
Hansestraße 27
D-59590 Geseke

Telephone: +49 (2942) 575863-0
Fax: +49 (2942) 575863-3
E-Mail: info(at)germantools-gmbh.de

Represented by the management:
Ulrich Mentrup M.A.

Commercial register:
District Court Paderborn HRB 13524

VAT-number:
DE 815 766 385